Ursa eco. Ursa insulation: types and characteristics of mineral wool

“If a car, then Mercedes, if a heater, then Ursa (URSA)” - and this statement really takes place. Founded in 2002, the Spanish-German brand has proved to everyone who is in charge here.

According to the Global Research & Data Services "Insulation" study in 2010, the company was the leader of the Russian market for the manufacture of fiberglass products.

It is enough to go to any hardware store and our hero will definitely be among the famous manufacturers. Why is URSA mineral wool so good? Specifications will show a clear answer to this question.

Few people know that in fact the URSA concern is part of the URALITA (Uralit) company, which has 4 main areas of activity:

• pipelines;
• Thermal insulation;
• Plaster;
• Roofing materials.

The URSA brand represents the second group - heat-insulating materials. The company's marketers did not torment customers with a huge line, but divided all products into 5 main groups:

1. PUREONE;
2. TERRE;
3. SECO.

The last two are extruded polystyrene foam products and insulating membranes. As part of today's article, we are talking about URSA glass wool, so we will focus on the first three points. Ursa insulation, both in rolls and in slabs, is made of fiberglass.

URSA GEO - fiberglass rules

Ursa Geo materials are considered the most popular type of this line. At the moment, this modification has twenty varieties, from universal, general purpose, to narrow-profile, specialized.

The company itself positions this product as glass wool for noise protection and thermal insulation. It is recommended to use this type of materials for insulation:

• facades;
• pitched roofs;
• Loggias and balconies;
• Partitions;
• Ceilings and floors;
• Baths and saunas;
• Including industrial insulation.

Of course, this is just a provisional list. This direction is distinguished by the name "GEO" to emphasize the environmental friendliness of the insulation.

Main characteristics of URSA GEO insulation:

• Thermal conductivity coefficient: 0.035-0.044 W / m * C;
• Moisture absorption: no more than 1kg/square meter;
• Temperature range: -60 to +300 degrees Celsius.

Below in the table: Ursa specifications GEO line

Insulation based on fiberglass "GEO" can be used in the most different conditions. For example, there are specialized options like URSA GEO Facade. There are also more universal ones. For example, URSA MINI is used for a wide variety of purposes.

Terra - we approach professionally

Ursa Terra - mineral wool insulation in the form of plates and mats. The manufacturer assigns a more professional role to this line. The insulation is designed for industrial facilities and the work of teams. Although, it is clear that this is only conditional. A total of 4 products are presented in the series, 3 of them in the form of plates and 1 in the form of a mat. By the way, you can find out the specific form factor by marking:

• RN - insulation in the form of rolls;
• PN - in the form of plates.

Main characteristics of URSA TERRA insulation:

• Thermal conductivity coefficient: 0.034-0.039 W / m * C;
• Moisture absorption: no more than 1 kg/m. kv;
• Combustibility group: NG (non-combustible);
• Temperature range: -60 to +220 degrees Celsius.

The table below lists the manufacturer's specifications.

Pure One - when perfection is needed

URSA mineral wool reveals all its strength in the URSA PURE ONE range. The company focuses on the ultra-high quality of such heaters. Of the 3 products in the line, 2 are rolls and one is slabs. You already know how to distinguish markings. The manufacturer insists on environmentally friendly products. It is stated that the mineral wool does not prick and does not leave dust. Made from 95% renewable fibres. Does not contain formaldehyde, which is released in small quantities during operation and in large quantities during melting. Below are the purposes of each product.

Main features of the URSA PURE ONE line:

Price

The most burning question that can dot the "and". How much does URSA insulation cost? As you may have guessed, Pure One will be the most expensive. You have to pay for health. For example, a Pur Van 37 RN roll 6.2 m long, 1.2 m wide, and 50 mm thick will cost 1212 rubles. A, Terra, density characteristics - 18 kg / m3, dimensions 1000 by 600 and 50 mm, will cost 420 rubles for 10 plates. Wool Ursa Geo M 25 9 meters long, 1.2 wide and 50 mm thick will cost 900 rubles. The number of plates in each package is different.

We have tried to focus here on technical details in order to provide the most complete information. When insulating your home or office, pay attention to the properties of this brand.

Test:

Have you used one of the insulations listed below or URSA mats?

URSA GEO Facade?
URSA mini?
URSA PUREONE 37RN?
insulation URSA TERRA 34 PN PRO?

What is insulation with URSA, look at the photo and video.

GEO M-11

Thermal insulation URSA Geo M -11 combines first-class performance with affordable price. Over the past 15 years, it has been the most demanded in Russia thermal insulation material(according to URSA research).

Insulation Ursa Geo M -11 is a mineral material based on fiberglass. It has the following benefits.

• Effective heat and noise insulation of premises, full preservation of characteristics over many years of operation.
• It is a non-combustible material (fire safety class - NG).
• Produced using URSA Geo eco-technology. The technology guarantees the safety of the material for environment and human health, both during production and operation.
• Represents mats, is issued in rolls. Packaging in rolls simplifies storage and transportation. Mats can be cut both longitudinally and transversely. This provides an economical consumption of material, including for roofs with a non-standard rafter pitch.

Mineral thermal insulation URSA Geo M -11 is designed for insulation of horizontal building structures. Installation of thermal insulation is carried out after the arrangement of the vapor barrier.

Insulation Ursa Geo M -11 has an increased elasticity of the fibers. It is provided with URSA Spannfilz technology ("Elastic felt"). The material quickly restores its original shape after deformation. It maintains a stable position inside building structures during the entire period of operation. The increased elasticity of Geo M -11 increases the ease of installation of the material in hard-to-reach areas, at joints, interfaces of individual parts of building structures.

Thermal insulation URSA Geo M -11 is used both in private construction and by professionals. The material is available in rolls. Installation of insulation does not require special skills or the use of specialized tools.

Specifications URSA M-11(G)

Dimensions:

Scopes of a heater of URSA Geo M -11

The material is used for insulation and sound insulation of horizontal surfaces and structures. Euromet specialists recommend using Ursa Geo M-11 thermal insulation for:

• insulation of ceilings (interfloor, attic, ceilings over cold basements). Insulation is carried out along the beams;
• insulation of reinforced concrete floors;
• repair of flat or low-slope roof slopes;
• thermal insulation of floors along the lags;
• use for roofing, assembled element by element from frame sandwich panels;
• insulation of change houses, block containers, modular buildings;
• thermal insulation for loggias and balconies (if you plan to use mineral insulation).

Thermal insulation URSA GEO M -11 can be used for:

• arrangement of frame partitions or walls with soundproof properties, as well as themselves frame walls from metal or wood (the internal distance between the skins of the frame and the thickness of the thermal insulation must correspond to each other);
• insulation in the middle layer when arranging partitions from blocks or stones;
• isolation of air ducts, pipelines, industrial equipment.

Modern equipment, application innovative technologies and the use of many years of experience - this is the secret of the company that managed to release URSA heaters of such high quality that this brand has taken a leading position in the European market and has significantly expanded the geography of sales. Right now in different countries On the European continent, there are fourteen factories for the production of this thermal insulation, and the dealer network includes several hundred representative offices and outlets.

URSA heaters - what are they?

URSA produces thermal and sound insulation for any need, while the quality of the materials remains consistently high. Their consumers are both large construction organizations and individuals who buy insulating materials for the insulation of country houses and cottages. After all, the materials that are produced under the URSA brand are suitable both for the insulation of residential buildings and for improving the energy efficiency of industrial facilities and engineering systems.

Today you can buy URSA insulation two types: mineral (made from fiberglass) and XPS (from extruded polystyrene foam). Let's take a closer look at each. Mineral insulation is available under the PureOne and GEO brands.

URSA Pure One is a new generation of thermal insulation materials, a special development of URSA, made according to a new unique technology. This is a snow-white material that looks and feels like wool. It is made of fiberglass passed special treatment. To connect the fibers, a fundamentally new binder component is used, which is made from acrylic. The technology by which PureOne is produced has long been used in Japan and America, but has not yet been introduced in Europe and Russia. It has stood the test of time, as for more than ten years mineral fiber insulation, which are analogues of URSA PureOne, has been protecting tens of thousands of homes from cold and noise. The introduction of this technology can be called a real technological breakthrough, which is comparable to the transition from slag wool to modern basalt mineral fiber. Ecologicaly clean natural material- quartz sand - allows you to get fiberglass that is safe for human health. A binder made of acrylic - a substance that has found wide application in medicine and cosmetology - is chemically neutral, does not contain phenol-forming compounds, does not emit any harmful substances. Also, the high quality of PureOne thermal insulation is due to the fact that its production does not use recycled materials, but integral part binder are harmless substances plant origin. But the cost of URSA PureOne insulation is higher than the materials produced under the GEO brand.

URSA GEO is an environmentally friendly material based on fiberglass, which has been processed according to modern technologies. It replaced the GLASSWOOL thermal insulation. new material much safer for both humans and the environment. After all, the GEO eco-technology made it possible to replace the synthetic components of the insulation with substances of plant origin. At the same time, the price of URSA insulation remained practically the same as before. URSA GEO is also made from quartz sand. This thermal insulation practically does not emit volatile compounds (their concentration is lower than European sanitary norms almost 15 times). Thanks to the new arrangement of fibers and their minimum thickness, this insulating material is highly resilient and is able to perfectly absorb sound vibrations.

URSA XPS is a heat-insulating material based on extruded polystyrene foam. It can be used not only for heat and noise insulation, but also as a waterproofing layer for structures buried in the ground. The high density of this material allows it to easily withstand seasonal ground movements, and the stepped edge eliminates the appearance of cold bridges.

How to buy URSA insulation

All URSA heaters are extremely durable, fireproof and perfectly increase the energy efficiency of buildings. With them, you can save up to 50% of the money you spend on heating. In our company you can buy URSA insulation of any type and purpose with delivery - whether it is insulation for the house, thermal insulation for its individual structures (roof, facade, foundation, etc.), or insulation for a bath.

Ursa Geo is a fiberglass-based material that allows you to reliably keep warm in the house. The insulation combines layers of fibers and layers of air, which helps protect the room from the negative effects of low temperatures.

Ursa Geo can be used not only for thermal insulation of partitions, walls and ceilings, but also for insulation of balconies, loggias, roofs, facades, as well as for industrial insulation.

Advantages and disadvantages

The material has many advantages.

• Environmental friendliness. Technologies and materials that are used for the production of insulation are absolutely safe for humans and the environment. Ursa Geo passes air well, while not changing its composition at all.
• Soundproofing. The insulation helps to get rid of noise and has a sound absorption class of A or B. Fiberglass absorbs sound waves well, therefore it is often used to insulate partitions.
• Ease of installation. During installation, the insulation takes the necessary shape. The material is elastic and securely attached to the insulated area, leaving no holes when docking. Ursa Geo lends itself well to transportation, does not crumble during construction work.

• Long service life. The service life of the insulation is at least 50 years, since fiberglass is a material that is difficult to destroy and does not change its characteristic qualities over time.
• Fire resistance. Since the main raw material for the manufacture of insulation fibers is quartz sand, the material itself, like its main component, is not a combustible material.
• Insect resistance and the appearance of rot. Since the basis of the material are inorganic substances, then the insulation itself is not subject to the appearance and spread of rot and fungal diseases, as well as different kind pests.
• Water resistance. The material is treated with a special composition that does not allow water to penetrate inside.

This insulation material also has disadvantages.

• Extraction of dust. A feature of fiberglass is the release of a small amount of dust.
• Susceptibility to alkali. The insulation is exposed to alkaline substances.
• The need to protect eyes and exposed skin when working with this material.

The precautions to be followed are the same as for any other fiberglass material.

Application area

The insulation is used not only for the insulation of walls and partitions in the room, but also for the installation of water supply systems, pipelines, heating systems. The material is indispensable for the owners country houses, as it is also used for insulation of floors between several floors.

Geo insulation is often used to protect roofs from freezing. And the varieties that relate to heaters with a high degree noise isolation, mounted on balconies and loggias.

Product Specifications

Manufacturer Ursa produces a wide range of insulation material.

• Ursa M 11. The universal variety M11 is used for almost all works on thermal insulation of structures. It is used both for insulation of floors between floors and in the attic, and for low-temperature insulation of pipes and ventilation systems. A foil analogue is also produced.
• Ursa M 25. Such a heater is well suited for thermal insulation of pipes. hot water and other types of equipment. Withstands temperatures up to 270 degrees.

• Ursa P 15. The insulation is heat and sound insulating, is produced in the form of plates and is suitable for the professional construction segment. The material is made of fiberglass using special eco-technologies. Not afraid of moisture, does not get wet.
• Ursa P 60. The material is presented in the form of high-density heat-insulating semi-rigid slabs, with its help, sound insulation is carried out in the “floating floor” design. It has two possible thicknesses: 20 and 25 mm. The material is made according to special technology protection against moisture, when wet, does not lose its properties.

• Ursa P 30. Heat and sound insulating boards produced using special technologies that protect the heat insulating material from getting wet. It is used for insulation of ventilated facades and in the construction of three-layer walls.
• Ursa Light. Universal lightweight material, consisting of mineral wool, is suitable for insulating both horizontal surfaces and partitions, walls. Not afraid of moisture, does not get wet. An economical option for use in private construction.

• Ursa "Private house". The heater is universal building material, which is used in the repair of private houses and apartments for thermal and sound insulation. Produced in special packages up to 20 linear meters long. Does not get wet and environmentally friendly.
• Ursa "Facade". The insulation is used for insulation in control systems with a ventilated air gap. It has a fire hazard class KM2 and belongs to low-combustible materials.

• Ursa "Frame". This type of insulation is designed for thermal insulation of structures on metal or wooden frame. The thickness of the material is from 100 to 200 mm, which allows you to reliably protect the walls of frame houses from freezing.
• Ursa "Universal plates". Plates from mineral wool perfect for heat and sound insulation of the walls of the house. The insulation does not get wet and does not lose its properties when water enters, since it is produced using a special technology. Available in the form of plates with a volume of 3 and 6 square meters. m. The material is non-combustible, has a class fire safety KM0.

• Ursa "Noise protection". Insulation non-combustible, used for quick installation in designs with a rack pitch of about 600 mm, since it has a width of 610 mm. It has a sound absorption class - B and fire safety - KM0.
• Ursa "Comfort". This non-combustible material made of fiberglass is suitable for insulating attic floors, frame walls and pitched roofs. Insulation thickness 100 and 150 mm. Application temperature from -60 to +220 degrees.

• Ursa "Mini". Insulation, for the production of which mineral wool is used. Insulation rolls small size. Refers to non-combustible materials and has a fire safety class KM0.
• Ursa "Pitched roof". This thermal insulation material is specially made for the insulation of pitched roofs. It provides reliable heat and sound insulation. Insulation refers to non-combustible materials.

The plates are packed in a roll, which greatly facilitates their cutting both along and across.

Dimensions

A large size range of heaters will help you choose the right copy for each case.

• Ursa M 11. Available in a package containing 2 sheets of 9000x1200x50 and 10000x1200x50 mm. And also in a package containing 1 sheet measuring 10000x1200x50 mm.
• Ursa M 25. Available in a package containing 1 sheet sized 8000x1200x60 and 6000x1200x80 mm, as well as 4500x1200x100 mm.
• Ursa P 15. Available in a package containing 20 sheets 1250x610x50 mm in size.
• Ursa P 60. Available in a package containing 24 sheets 1250x600x25 mm in size.
• Ursa P 30. Available in a package containing 16 sheets 1250x600x60 mm in size, 14 sheets 1250x600x70 mm in size, 12 sheets 1250x600x80 mm in size, 10 sheets 1250x600x100 mm in size.
• Ursa Light. Produced in a package containing 2 sheets measuring 7000x1200x50 mm.