Chandelier from pipes how to make. Do-it-yourself lamps and lamps from pipes: four simple instructions

Loft-style lighting devices are not just a tribute to fashion, but also a practical economical solution for the main or additional lighting. Consider how to make lamps from pipes on your own, what are the main features of working with the material, how the assembly process will look like with my own hands how to make a pendant chandelier from metal pipes, a wall lamp from metal-plastic, table lamp and couplings, as well as what difficulties may arise in this case.

Today, anyone can make lamps on the basis of metal, plastic and metal-plastic pipes on their own. To do this, you need to acquire patience, a desire to reach the planned result, a set of suitable materials and tools and strictly follow the instructions. The advantages of such homemade products are many:

1. Low cost of the product.
2. Ease of standard threaded connection.
3. The ability to create any design.
4. Wide access to materials (parts can be bought at the construction market, vtorchermet, easy to find).

Of the processing features of the pipe materials used, when creating fixtures, the following nuances should be taken into account:

1. All elements connected to the thread must have the same standard and similar characteristics (pitch, diameter, direction).
2. Metal-plastic pipes should bend well with effort, and their surface should melt during heat treatment (polypropylene analogues are also most often suitable for this role).
3. If the product is not planned to be painted, then it is better to take galvanized, stainless, copper or brass materials as a basis.
4. The metal body of the lamps easily conducts electricity, so when installing 220V bulbs on them, they must be grounded.
5. The shape of metal-plastic lamps is set by means of bends, and cast-iron and metal lamps - with the help of various adapters, pipe sections and fittings.

To facilitate and speed up the process of assembling such lighting devices, it is better to manufacture in accordance with the following algorithm:

1. Make a drawing / sketch indicating all the elements, their dimensions, characteristics.
2. Before assembly, paint and dry all components and materials that require this, or decorate surfaces in accordance with design ideas.
3. Carry out the assembly of the lamp strictly according to the plan.
4. Install wiring and light bulbs.
5. Fix the lighting device, check the serviceability by connecting to the network.

Important! One of the most important indicators of the work of a lamp with a metal case is electrical safety. Therefore, for those who do not have experience in electrical installation procedures, it is better to consult an experienced specialist in this field before starting assembly. For internal wiring, a thick conductor with good electrical insulation should be used and positioned so that it does not rub against the edges of the pipes, the sharp edges of which must be removed with abrasive materials. In addition, it is better not to locate the joints of the cores inside such a structure, as far as possible, in extreme cases, to isolate them securely.

Suspended chandelier made of pipes

Consider one of the simplest options for assembling a pendant chandelier based on brass or copper pipes. To make such a lamp you will need:

1. Five pieces of pear-shaped light bulbs.
2. Ten pieces of pipe - two sets of 5 of the same length - short and long.
3. One cut maximum length as a ceiling hanger.
4. Five adjustable brass hinges.
5. Set of 5 ceramic bulb holders.
6. Double wire (selected so that it easily enters the tubes).
7. A coil of electrical cable.
8. Insulating tape.
9. Electrical tool.

Read also How to connect an LED to a 220 V network

Installation instructions

In the manufacture of such a lamp, you must follow the following step-by-step instructions:

• mount the wiring by unscrewing the pads on the cartridges and connecting the wires to them, as shown in the image below;

• pass the internal wiring from the cartridge through the pipes, connect long and short segments by means of hinges;
• tighten the wiring and cut, leaving about 5 cm for switching with the main cable;
• screw the cartridge into the edge of the tube segment, which will be located at the bottom of the structure;

• screw long pipe sections into a 5-pin fitting, thereby assembling the base of the lamp;
• twist the wires coming out of the nozzles white color with a wire of the same shade of the main cable, black - by analogy;

• carefully thread the resulting twist with the main cable into the pipe, on which the lamp will be attached to the ceiling surface;

• the chandelier is hung on a chain or mounting wire in its place, the bulbs are screwed in, the network is connected and the performance of the assembled lamp is checked

Wall lamp made of flexible metal-plastic

For self-assembly of a wall lamp from metal-plastic pipes, you will need the following components:

1. A set of metal-plastic pipes with a length of segments from 20 to 50 cm.
2. A wood base or a piece of thick-walled plywood or other similar material.
3. Wiring.
4. Cartridges and lamps for them, as well as fittings of a suitable size.
5. Saw for metal or pipe cutter for metal-plastic.
6. Screws, Phillips screwdriver or screwdriver.
7. Paper, paint, decor materials.
8. Silicone sealant.

Manufacturing instructions

The process of making a wall lamp from pipes is as follows:

1. A fragment of plywood or solid wood is adjusted to the shape conceived by design, painted or decorated.
2. A hole is drilled in it (or several - depending on the number of tubes and light bulbs to them), with a diameter similar to a piece of metal plastic pipe.
3. This segment is inserted into it and sits on glue or sealant.
4. After drying and fixing, two-wire wiring is passed into it.
5. From the free end, the segment is fitted.
6. If the fitting is threaded, you can select the appropriate threaded cartridge for it. If not, the latter can simply be glued to the sealant, having previously connected it to the conductors.
7. Next, the finished lamp is attached to the wall surface with self-tapping screws or dowels.
8. The light bulb is screwed in, the wiring is connected to the network and checked.
9. As a decor element for a fitting with a cartridge, you can choose a floor lamp, ceiling lamp or sconce elements that are suitable in size to improve its design.

The main advantage of a luminaire on a metal-plastic pipe is the ability to change the direction of the light flux due to its slight bending.

Table lamp made of muffs

To make a do-it-yourself lamp from couplings, you will need the following components:

1. Short and long nipple - just a couple of pieces.
2. Six couplings (angles).
3. Six short nipples for their connection.
4. Three tees for plumbing.
5. Cord with plug and switch.
6. Hot glue tool.
7. Insulating tape.
8. Drill and other mounting tools.

The scope of such a lamp made of pipes is quite wide - for the main or additional illumination of the working area of ​​the table, workbench and any other place (due to the compactness of the lighting device).

Assembly process

Detailed instructions for making a table lamp from clutches are as follows:

• before starting work, all pipe sections, couplings and connections are cleaned household cleaner, for example, with white spirit, the stickers are removed and then dried;
• in order to bring the wires to the junction in the lamp, it is necessary to temporarily disconnect the wire from the switch;

• then a cartridge of a suitable size is inserted into the coupling. You can fix it either with a thread, or by putting it on glue, with a gun, after connecting it to the wiring;

We often come across articles that describe how you can create unusual, but at the same time useful things for your house or apartment from unnecessary materials that, for example, were left after repairs. Also, crafts can be made from plastic bottles, disposable tableware, corks and the like. But in this article we will talk about material such as PVC pipes, which, according to the rules, are needed and used in the sewer system, but now we will describe how to make useful thing such as PVC pipe lamp.

From a completely simple and inexpensive material, you can create something fabulous and fantastic, the most important thing here is to have skillful hands and a rich imagination, the rest is up to the small. Thanks to these good qualities you can create beautiful and beautiful night lights in the form of lamps.

In fact, we don’t know who first thought of this idea and created such beauty as a lamp made of PVC pipes, but nowadays people of such nationalities as Brazilians, Argentines, Australians and Chinese are engaged in such needlework, but ours is no exception. country Russia.

For implementation beautiful crafts we will list the materials and tools that we will need during the work:

1. A drill with a sufficient and diverse set of nozzles that have different thicknesses and can still be distinguished by the types of grinding, we need abrasive ground tips.

2. PVC pipe. When choosing, you need to take into account the size, that is, the diameter, it should be in the range from 25 to 55 centimeters. At the same time, provide for a place in which your night light will stand or hang and the dimensions of the pattern that you will cut out on the pipeline.

PVC pipe wireless lamp

If you do not want to spend a lot of time and effort on making a pipe lamp, then the work can be done with just one drill. But if you want to perform a drawing that is voluminous and complex in its composition, then for this you need to include execution from small to big holes, complex rhinestones, working with the thickness of the pipe walls, removing the outer layers to give volume and aesthetics and, of course, giving the 3D effect to some details.

Before we start making patterns and rhinestones on a lighting device, let's decide what size we need a lamp. The main criteria for pipe size are its diameter and height. If you have decided on the size of the craft, then let's move on to choosing templates and stencils for the desired picture that you want to depict on your device. As patterns, a floral look of a picture, a landscape or a banal ornament, and the like, the choice of your taste can serve.

The silhouette of the selected pattern is transferred to the pipe in a very simple, but at the same time convenient method, at the same time, attention is paid to the edges at the top and bottom. Before you begin, consider the desired size of the holes in the pipe in diameter so that the drills fit your ideas. A very simple option can serve as a good idea, for example, you don’t need to draw and cut out various patterns, you can simply cut out a beautiful decorative lamp using the drawn holes of various diameters.

A very elegant drawing is obtained when light halftones are used in the work. Such an effect and quality can be obtained when the outer layer of the pipe, that is, PVC, is removed with the help of abrasive tips. The more layers you remove, the greater the transparent effect will be and the light will be much brighter in these places than on a simple surface.

To give the lamp made of PVC pipes the effect of 3D format, it is necessary to attach the parts that will protrude beyond the walls of the pipe, first you need to thin them with the same tips that were used when adding a light halftone, after doing these works we cut out the shape with special construction knife.

To give aesthetics and the final effect, we take a building hair dryer (it gives more intense heat), heat the form to a state of elasticity and bend it to the side. We leave the mold alone and wait for it to cool, when it cools it will remain in the same state in which you bent it during heating.

Such a lamp at the end of the work can not even be painted, the natural color of the pipes (white) will fit into the design of your house or apartment quite easily. But still, if you want to give the lamp a color design, then it will not take much time and a lot of effort, you just need paint from aerosol can.

Upon completion of work from the sphere of scenery, it is worth moving on to works that will answer all practical matters. So, for the completed crafts, you need a very strong and stable shelf or base, at your discretion, because the lamp made of PVC pipes must stand steadily, since it weighs a lot and is also rather big in size.

As a light in your device, there may be different kinds lighting with lamps. It is recommended to use energy-saving lamps, because they will not allow the walls of the lamp made of PVC pipes to overheat and deform the decorative shell. To give a more decorative lamp, you can use a garland during lighting, it will turn out very interesting.

Reading 6 min.

Various interior items made from the most unexpected things and even scrap metal are increasingly becoming decorations for residential premises.

Fixtures from water pipes both plastic and metal, cast iron are made by many craftsmen, turning a simple plumbing product into designer items that are unusual in appearance.

Water pipe lamp

Self-assembly of lamps from pipes

It is very easy to assemble a lamp yourself from the remains of water pipes. This is completely independent of the material of manufacture. thinking through appearance and the purpose of a particular lighting device, the style of the room in which it will be located is taken into account. The properties of plastic to be heat-treated are taken into account, metal-plastic pipes are bent, and cast-iron pipes are folded through adapters and connectors into the most bizarre shapes.

The main thing that attracts creators is cavities into which you can easily skip electrical wire. A variety of cartridges will allow you to choose the most suitable size and simply stick the material in the right place.

A lamp made of water pipes is perfect for a loft or country style room. A pattern carved in a large-diameter PVC pipe, illuminated from the inside, will decorate even the most sophisticated interior.

PVC pipe floor lamp

Making lamps from plastic pipes with your own hands is a very simple process. The material is easy to cut. It can be bent after heating. At the same time, it is not expensive, does not pass electricity and can serve as an additional insulator. But it should also be remembered that plastic is subject to melting and deformation, so lamps should be chosen that do not heat up.

If you use pipes with a small diameter, connectors and tees, you can assemble a structure of any configuration, simply by coming up with a suitable design and folding the components according to the type of designer. So, for example, a floor high product, folded through tees, with curved top lines, looks very impressive. Such a lamp can have 4 legs or a wooden round base. The number of installed lamps depends solely on the desire of the creator.

Decorate an artsy living room floor lamp from a pipe of large diameter, in which patterns are cut. Warming up its individual parts with a building hair dryer, you can bend the material and make the pattern voluminous. By cutting off some areas, you can make them more translucent. If desired, paint the surface in any color. All that remains is to fix the light source inside, put everything on a PVC or wooden base and connect the electricity.

The connection of individual elements is strengthened with an adhesive layer, having previously passed a cable of maximum length inside.

For giving

Making decorative items from old cast iron pipes very much in demand for use in the country. It can be stylish sconces with large shades or a loft-style chandelier assembled in the form of bizarre curving lines with several lamps at the ends.

Home-made lamps are also appropriate as street lighting, installed on wooden posts and the facade of the building. The main thing to remember is that any metal conducts electricity, so you should take care of reliable cable insulation.

For playground

Homemade versions of pipe lamps are perfect for playgrounds. They can be assembled in the form of a fence by inserting lamps inside areas with a large diameter. This design will reliably protect the light source from mechanical damage, and hidden cables completely eliminate the possibility of injury from electricity.

By fixing the pipe along the perimeter of individual entertainment areas, drilling holes in it throughout the entire area and inserting an LED strip inside, you can turn the most banal site into a fairy-tale world.

Wall lamp made of flexible metal-plastic

Metal-plastic pipes have 1 significant advantage over PVC products- they bend. A light source with such a housing can be turned in any direction without worrying that movement will lead to breakage.

For assembly, you will need a blank made of wood or thick plywood. A base is made from it, which is attached to the wall. In addition, you should prepare a pipe of the right size, a suitable cartridge, cable, electrical tape.

Installation instructions

First you need to draw the design of the future product, which will show how to make the main components. To work, you will need a drill, a jigsaw, a clerical knife and a few self-tapping screws.

A blank of any shape is cut from a piece of wood or thick plywood. In the place of the intended fastening of the pipe, a hole of the appropriate diameter is drilled.

For full functioning, a pipe of 20-50 cm (or more) is suitable. It is inserted into the hole in the base. Then they pass through the pipe electrical cable. On the reverse movable side, it is necessary to fix the cartridge. If necessary, you can use additional plumbing fittings.

When the flexible metal-plastic wall lamp is fully assembled, it is screwed to the wall with dowels or self-tapping screws, the LED element is installed and put into operation.

Plastic Tube LED Night Light

If cast iron products are more suitable for making loft-style lamps, then delicate white plastic is best used to create night lamps that fit into any interior. They are decorated with openwork patterns of any stylistic orientation, ranging from exquisite floristry to images of fairy-tale characters.

Manufacturing instructions

Making a plastic lampshade is very simple. To do this, you need a wooden or metal base with a built-in cartridge, a piece of PVC pipe with a diameter of at least 15 cm and a length of 20-30 cm, a drill with a set of drills, a clerical knife.

To begin with, the edges of the future lampshade are ground and a pattern is applied. Then holes of different sizes are drilled along the marked lines. Oblong lines are cut with a knife. If you want to give the image more realism, you can cut off some areas of the surface, making them thinner to increase throughput. You can change the shape and bends of some sections by heating them with a building hair dryer and arching them.

After the pattern is worked out, the lampshade is attached to the base and the light bulb is screwed in. Now the whole structure is assembled and it can be connected to electricity. If desired, the plafond can be painted.

Chandelier manufacturing technology

It may seem to many that when using pipes and plumbing accessories, the chandelier will look rustic and even clumsy, but this is not so. With the right approach and careful execution, they create a work of art even from such simple materials.

Assembly process

For manufacturing, you will need pieces of metal-plastic pipes, splitters, a ceiling socket, cartridges.

To begin with, they think over the design of the future product and the number of lamps that will be installed. In the center of the whole structure there will be a splitter, to which pipes are connected and bent into desired shape. Wires are passed through the resulting workpiece. Since the cord will pass through several endpoints, it is recommended to run parallel lines into each individual branch, connecting them only under the ceiling outlet, excluding breaks inside the chandelier.

Cartridges are fixed to each pipe at the ends, having previously connected them to the cable. Through a small piece, connect the outlet to the splitter. Then the electricity is connected.

Ready product paint and supply with plafonds. The main thing is that the result pleases the inhabitants of the house.

One of the tools that help create a comfortable environment in the house is beautiful lamp. The stores present a large number of various models. The better and more beautiful the device, the more expensive it is. Therefore, many craftsmen decide to make lamps from pipes with their own hands. There is nothing complicated in such a process: having simple details available, you can make a unique design. With particular ease, plumbers can make such devices.

In this article:

We collect a chandelier from pipes

Ordinary chandeliers are chosen as the main source of light in the living rooms, in the kitchen and in the bedroom. To diversify the design of the room and stand out against the background of acquaintances and friends, a device made from improvised materials will help.

To assemble a lamp from polypropylene pipes and fittings, you will need the following components:

• a ceiling lamp with a grate from an industrial lamp;
• two pieces of plastic pipes;
• the wire;
• plumbing tee and corner;
• two flanges, the same size as the cartridge;
• wooden block or other base;
• paint can;
• paper;
• screwdriver and screws.

First, disassemble the ceiling by removing the grille and cartridge, if a lamp with a grille looks good in your interior, then leave it. Screw the metal flange on the outside of the cartridge. Be careful not to damage the wires.

Screw the plastic pipe to the metal flange, then successively attach the elbow, then another piece of pipe, a tee, and finally finish again with a flange. With each new part, do not forget to stretch the wire.

Make several of these structures, and after everything is ready, they can be screwed to a wooden base. Don't forget to run out and connect the cables to the central system. The finished product can be painted in any color so that it fits the interior of the room. Don't forget to lay down some paper before doing this so you don't stain the floor. Screw in the lamp and, by clicking the switch, check the operation of the lamp made of PVC pipes.

By excluding the corners from the design and lengthening the plastic pipe, you can make a floor lamp. The main thing is to prepare a stable foundation.

Wall lamp made of flexible metal-plastic

You can assemble yourself Wall lights from water pipes with rotary lamps. To change the angle of incidence of light, it will be enough to turn the lighting device in the desired direction. During work you will need:

• flexible plastic pipes 20-50 cm long;
• solid birch, pine or thick plywood for the base;
• electric wire;
• cartridge and lamps;
• jigsaw;
• screwdriver and screws;
• spray paint and paper;
• sealant.

At the base we make holes that match the diameter of the pipe. From a small bar, cut out a place for attaching a cartridge, do not forget that with reverse side a metal-plastic case will be supplied. Pull the wire through the flexible base and solid wood or plywood.

Let's insert metal-plastic pipe into the base and fix it with screws or glue. We fix the cartridge in the prepared bar, and isolate the circuit with sealant. We paint the finished structure from plastic pipes in a pre-selected color and after drying we hang it on the wall.

You can make or buy a beautiful floor lamp for the cartridge - then the pipe lamp will look more attractive.

Table lamp made of muffs

Let's go back to the loft style, only now let's make a table lamp with one light source. It is suitable for home office or office. Depending on the chosen light source, such a product will help either focus or relax.

Necessary tools and materials:

• long and short nipple;
• fitting (six metal corners and three tees);
• six small nipples that will connect the corners;
• drill with a drill for metal;
• wire with plug and switch;
• glue;
• insulating tape.

Prepare metal parts by first cleaning them of grease stains with white spirit. Since the rein will need to be threaded through narrow holes, cut out the derailleur. Screw the lamp into the socket and insert it into the first square, before that, stretching the wire through the part. Fix the lighting device in the design position with glue.

In one of the tees, make a hole for the cable outlet. In order not to be mistaken with the place of drilling, imagine how the lamp will stand.

We fasten small nipples to the central tee with a hole. We connect tees with nipples and corners on the sides to them. This will be the base of the product. We fasten the corner in which the cartridge with the lamp stands to the long nipple, then comes the corner and the short nipple. We connect the two parts of the lamp together. Do not forget to stretch the wire in advance. Insert the switch back and test the table lamp.

Such lighting from parts of the pipeline will show guests and relatives your resourcefulness. Seeing the finished result, you will experience great joy and a sense of pride. DIY lamps will last a long time and will never go out of style.

Creative ideas often appear unexpectedly and seemingly out of nowhere. But their material implementation gives such dividends that the costs of their implementation in reality seem scanty. Today we will try to make a decorative lamp out of a seemingly nondescript PVC pipe that will not leave anyone indifferent.

It will take

To materialize this creative idea in a beautiful product we need to have:

• a piece of 10 cm PVC pipe about 30 cm long;
• paper;
• wooden box or timber 12 × 6 × 30 cm;
• a small piece of matte PVC plastic;
• electrical materials (wire, plug, cartridge, bulb).

You should also get:

• metal ruler and marker;
• dremel;
• milling cutter with nozzles;
• sickle knife;
• sandpaper;
• a can of aerosol paint;
• glue gun.

Algorithm for manufacturing a lamp from a PVC pipe

On the pipe blank, we mark a section 24 cm long. Using a sheet of paper, we make circular lines according to the markings on the side surface of the plastic pipe.

According to the circular markings, we cut off the excess from the plastic pipe blank with the help of a mini-grinder.

We place a wooden box on the desktop, which will serve as a template. Once again, we will check its cross-sectional dimensions: they should be 12 × 6 cm, which is acceptable as a template for a pipe. PVC diameter 10 cm

We twist a sheet of paper into a tourniquet and set fire to it from one end from an external source of fire (lighters, matches, etc.).
Thermal energy from a burning sheet of paper will be quite enough to soften the plastic pipe material, mainly on one side. This method is for those who do not have a building hair dryer.

Then quickly, until the plastic has cooled down, we insert a wooden template inside the pipe and form it from round section rectangular along its entire length, pushing the wooden box through the pipe until it appears on the other side of the pipe blank.

We leave the template in the pipe for a while until the plastic cools down and takes on a stable rectangular cross-sectional shape, after which it can be removed from there. After making sure that the shape of the rectangular plastic element turned out without flaws, we process the ends with a mini-drill, removing burrs and rounding the edges. The round ring left from cutting the plastic pipe is used as a template to reproduce the circle in the center of the wide side of the rectangular plastic element.
By using manual router cut out the circle according to the marked markings and clean the edges of the resulting hole by changing the nozzle.

At a certain and equal distance from the edge of the hole, we outline 23 points, evenly spaced along the circumference of the large circle. We carry out 23 small holes of the same diameter according to the applied markings. Using a sickle-shaped knife, carefully remove burrs from all holes.

On the front side of the rectangular blank, where one large and 23 small holes have already been made, we mark two symmetrically located slots indented from the ends by 1.5 cm and also 1.5 cm wide, which will also pass along the sides of the blank, a little short of to the opposite wide side.

Carefully cut out the slits with a mini drill and cut-off wheel and remove the strips of plastic using a crescent knife. They also clean the edges of the slots.

On the back side of the workpiece of the lamp housing, from one end, we outline and drill two small holes with a mini-drill, one below the other, and clean them with a sickle-shaped knife.

small piece sandpaper of suitable grit, we finally grind all the places of cutting and drilling of the lamp body.
We apply paint from an aerosol can on the future body of our homemade lamp and make sure that it lies evenly over the entire surface and without smudges.

In accordance with the dimensions of the lamp body 12 × 6 × 24 cm, we mark out a sheet of translucent PVC plastic for cutting and cut out a piece of 24 × 24 cm with scissors. Draw a marker along the ruler two straight lines parallel to the edges and at a distance of 6 cm from them.

We bend the plastic sheet along the drawn straight lines and get a U-shaped profile, which we insert into the lamp body so that the wide side lies against the front panel from the inside and overlaps the large and small holes.

We glue the U-shaped matte plastic with glue gun to the luminaire body at the corners and let the joint harden and set.

We pass a copper two-wire wire through the upper hole made on the back of the lamp housing so that the cartridge at one end is inside the housing.

We attach an electric plug to the second end of the wire, and screw an incandescent bulb with a colored bulb with a power of not more than 5 watts into the cartridge in order to preserve the plastic from which our lamp is mainly assembled.

We plug the plug into an electrical outlet so that a light bulb lights up inside the body of our homemade product. As a result, we will witness an unusually beautiful glow of our decorative lamp, the effect of which will increase even more if placed in a dark place.

Attention!

Plastic dust is a serious hazard to your health, so a respiratory mask will be quite useful for the entire time you work on a lamp made of PVC pipe. Do not interfere with gloves and goggles.